The NBC-77 SOF filter canister, in combination with a full-face mask, mouthpiece assembly or PAPR provide reliable protection of air passages against a wide range of harmful and highly toxic substances including all known CBRN agents. Filters are produced with standard round threads according to STANAG 4155 (EN 148- 1)- Rd 40×1/7″ or GOST 8762-75 – 40×4 mm. Filter components are made of hard plastic. It provides a very robust product which is extremely durable against shock and impact damage in operational use.
The filter canister in connection with suitable respirator or PAPR provides protection against solid and liquid particles, pepper spray (OC), smokeproducing substances, radioactive particles, bacteria and rickettsia, fungi, toxins, viruses, Riot Control agents (Lachrymators, Sternutators, Vomiting agents), Blister agents (Vesicants), Chocking agents, Blood agents, Nerve agents, Incapacitants, Herbicides, Pesticides and TIC, such as bromoacetone, CS, CR, CN, CNC, CNS, CA substances, organic compounds of arsenic – diphenyldichlorarsine – CLARK I (DA), diphenylcyanoarsine – CLARK II (DC), adamsite (DM), diphenyldichlorarsine (DA), ethyldichlorarsine (ED), methyldichlorarsine (MD), mustard gas (H), sulphur mustard gas (HD), T-mustard gas, Q-mustard gas, nitrogen mustard gases (HN1, HN2, HN3), lewisite (L), mixed mustard gas (H-L), phosgene oxime (CX), phosgene (CG), diphosgene(DP), chloropicrin (PS), hydrogen cyanide (AC), cyanogen chloride (CK), arsine (SA), G-agents: sarin (GB), cyclosarin (GF), soman (GD), tabun (GA), IVA (GV), V-agents: VX, VR, VE, VG (amiton), VM and toxic industrial chemicals such as: fumes of organic or inorganic acids, hydroxides, organic solvents with the boiling point above 65 °C, ammonia, amines, inorganic and acid gases, agricultural chemical combustion gases, other toxic substances, e.g. benzene, toluene, vinyl chloride, fluorine, hydrogen fluoride, sulphur oxides, chloracetic acid, aldehydes, mixtures of inorganic acids, and organic substances, mercury vapours, radioactive iodine, organic compounds of iodine (Iodomethane, 129, 131), radioactive particles, etc.
Breakthrough time of a filter is tested according to EN 14387+A1 at humidity 70% and flow rate 30 l/min, which is equivalent to the volume of air per minute used by an average person carrying out medium heavy work. The approximate lifetime (usage time) of a filter may, under normal conditions, calculated by comparing the concentration at the workplace and the minimum Dynamic Adsorption Capacity (DAC) for the filter.
STORAGE AND MAINTENANCE:
The filters are sealed in plastic bags by the manufacturer. Store the filters unopened in a clean place at even temperature, most appropriate at -5 to +30°C and relative humidity below 80%. Sealed filters tolerate also conditions of -30 to +50°C and RH below 95%. The storage period (month and year) for filters is marked on the filter label. Do not try to regenerate the filters. Never clean the filters with compressed air or compressed water.
After use, the filters are special refuse. Make sure that they are disposed of according to the filtered substance (gases or particles) in accordance with current waste treatment regulations. If the product is to be disposed of, it should be dismantled from the respirator and disposed of as solid waste. Please see local authority regulations for disposal advice and locations.
|Concentration of testing gas||
Breakthrough time in minutes EN requirement
DAC in grams NBC – 77 SOF
|Hg||Mercury||Hg||——||13 mg/m³||100 hours||>170 hours||>3900|
|REACTOR||Methyloidide131||CH₃I||–||–||2 hours||>2 hours||–|
|dimensions w x h||110 x 85 mm|
|connection thread||STANAG 4155 / EN 148-1 or GOST|